Electric water heaters, hand dryers, flykillers, quartz heaters and water coolers from Hyco Manufacturing

Frequently Asked Questions

Search our library of FAQs for product related help.

Do you have a question about any of our products that you think we should add to our frequently asked questions? If so please contact us

Search FAQs
select product

FAQs:

Handyflow (HF05LP & HF10LP )
Q.	*Is the water heater vented or unvented?*
A.	Vented, via the spout

back to top
Handyflow (HF05LP & HF10LP )
Q.	*Can I fit ordinary taps to the unit instead of the spout?*
A.	No because the spout is the vent. Fitting the water heater to ordinary taps will cause pressure to build up inside the unit.

back to top
Handyflow (HF05LP & HF10LP )
Q.	*What is the tank made of?*
A.	The tank is made from a typr of plastic.

back to top
Handyflow (HF05LP & HF10LP )
Q.	*What is the kW rating of the water heater?*
A.	2.0kW

back to top
Handyflow (HF05LP & HF10LP )
Q.	*Is there a safety cut-out on the water heater?*
A.	Yes - The Handyflow Point of use water heater has a re-settable thermal cut-out. To reset the water heater, simply switch the unit off - it will then re-set itself.

back to top
Ultrawash (UL30E)
Q.	*What water pressure can the water heater work at?*
A.	The minimum water pressure required is only 0.4 Bar and the maximum is 6 Bar.

back to top
Ultrawash (UL30E)
Q.	*Is this type of water heater energy efficient?*
A.	Instantaneous hand wash units are a very energy efficient form of water heating because they only use power when the tap is switched on. It does not use power at any other time because it does not store any hot water at all.

back to top
Ultrawash (UL30E)
Q.	*What is the temperature range of the water?*
A.	The temperature of the water is controlled by the flow-rate. As the water passes through the unit, it is heated up, so the faster the flow rate the cooler the temperature will be.

back to top
Ultrawash (UL30E)
Q.	*Can the water heater be connected to normal taps?*
A.	No, the Ultrawash instantaneous water heater can only be installed with the supplied spout. If you need to connect to normal taps, please see the Inline Multipoint (IN95)

back to top
Everlast Unvented Direct & Indirect (90 to 300 Litres) (EVLDQ & EVLIQ)
Q.	*Is the water at mains pressure or not?*
A.	Mains pressure

back to top
Everlast Unvented Direct & Indirect (90 to 300 Litres) (EVLDQ & EVLIQ)
Q.	*Is the water heater vented or unvented?*
A.	Unvented

back to top
Everlast Unvented Direct & Indirect (90 to 300 Litres) (EVLDQ & EVLIQ)
Q.	*What is supplied with every water heater?*
A.	The Everlast comes complete with all the fittings and accessories needed for installation. Please refer to the Everlast page for full details of these accessories.

back to top
Everlast Unvented Direct & Indirect (90 to 300 Litres) (EVLDQ & EVLIQ)
Q.	*Can the temperature on the water heater be adjusted?*
A.	Yes – from 55 degrees C to 65 degrees C. The thermostat is preset to 55 degrees C.

back to top
Everlast Unvented Direct & Indirect (90 to 300 Litres) (EVLDQ & EVLIQ)
Q.	*Is there a safety cut out on the water heater and can it be re-set by the user?*
A.	The safety cut-out is manually re-settable and is located on the immersion heater.

back to top
Everlast Unvented Direct & Indirect (90 to 300 Litres) (EVLDQ & EVLIQ)
Q.	*Can the electric water heater be located above the sink?*
A.	The unit is floor standing but because it works at mains pressure rather than gravity it can be located more or less anywhere convenient.

back to top
Everlast Unvented Direct & Indirect (90 to 300 Litres) (EVLDQ & EVLIQ)
Q.	*What is the inner container made out of?*
A.	The Everlast tank is made from high quality 'Duplex' stainless steel which comes with a 25 year guarantee.

back to top
Everlast Unvented Direct & Indirect (90 to 300 Litres) (EVLDQ & EVLIQ)
Q.	*Do you need to buy any other accessories?*
A.	No - all necessary accessories required to comply with Buildings Regulations are included with the water heater.

back to top
Everlast Unvented Direct & Indirect (90 to 300 Litres) (EVLDQ & EVLIQ)
Q.	*What is the difference between an indirect unit and a direct unit?*
A.	A direct type is heated by one or more electrical elements, like the water in a kettle. An indirect type is heated by a coil which is heated by hot water from a central heating boiler. It usually has an electrical element as well (like a domestic hot water tank).

back to top
Everlast Unvented Direct & Indirect (90 to 300 Litres) (EVLDQ & EVLIQ)
Q.	*Is there any maintenance to carry out on this water heater?*
A.	Yes, the unit should be serviced annually to ensure safe working and optimum performance.

back to top
Inline Multipoint (IN95)
Q.	*How many sinks does the water heater feed?*
A.	The Inline 9.5kW model can be connected to more than one sink, providing only one outlet is used at any one time.

back to top
Inline Multipoint (IN95)
Q.	*What pressure can the water heater operate at?*
A.	The minimum pressure is 1 Bar and maximum operating pressure is 6 Bar.

back to top
Inline Multipoint (IN95)
Q.	*Do I need any special taps or accessories?*
A.	Ordinary taps are fine but we do recommend spray heads be used with the water heater because these help to control the temperature. A pressure relief valve is incorporated into the water heater so you should not need any separate accessories.

back to top
Inline Multipoint (IN95)
Q.	*Can I use the Inline water heater to feed a shower?*
A.	The 9.5kW instantaneous water heater is suitable for this type of application.

back to top
Whirlwind (WD185)
Q.	*Is the hand dryer vandal resistant?*
A.	The Whirlwind hand dryer is a sturdy unit made of 3mm thick ABS plastic, but is best suited to an environment where there is no real chance of vandalism, e.g. offices.

back to top
Whirlwind (WD185)
Q.	*How powerful is the hand dryer?*
A.	The Whirlwind hand dryer has a 1.85kW element.

back to top
Whirlwind (WD185)
Q.	*What is the airflow rate of the hand dryer?*
A.	The airflow of the hand dryer is 120m3/hour, with a velocity of 14m/second.

back to top
Cyclone (CYC18F / CYCA18F )
Q.	*Can the timer on this hand dryer be adjusted?*
A.	The timer on the manual version can be adjusted internally to between 20 and 55 seconds and the default time is around 50 seconds.

back to top
Cyclone (CYC18F / CYCA18F )
Q.	*Does the hand dryer have a safety cut out?*
A.	Yes the hand dryer does have a safety thermal cut-out.

back to top
Cyclone (CYC18F / CYCA18F )
Q.	*Is the hand dryer vandal resistant?*
A.	All hand dryers in the Cyclone range are made from die-cast aluminium, making them vandal resistant and suitable for medium to high risk applications including restaurants, schools, etc.

back to top
Cyclone (CYC18F / CYCA18F )
Q.	*How powerful is the hand dryer?*
A.	The Cyclone 1.8kW output has a 1600W element and a 200W brush motor.

back to top
Cyclone (CYC18F / CYCA18F )
Q.	*What is the airflow rate?*
A.	The airflow of the 1.8kW unit is 362m3/hour.

back to top
Cyclone (CYC18F / CYCA18F )
Q.	*Is the hand dryer noisy?*
A.	The sound level for the 1.8kW unit is 70+/- 5 decibels.

back to top
Cyclone (CYC18F / CYCA18F )
Q.	*Is the hand dryer water proof?*
A.	The units are moisture proof and rated IPX1.

back to top
Cyclone (CYC18F / CYCA18F )
Q.	*Is the sensitive distance of the sensor adjustable?*
A.	Yes, the range is 10 to 30cm.

back to top
Cyclone (CYC22F / CYCA22F)
Q.	*Can the timer on this hand dryer be adjusted?*
A.	The timer on the manual version can be adjusted internally to between 20 and 55 seconds and the default time is around 50 seconds.

back to top
Cyclone (CYC22F / CYCA22F)
Q.	*Does the hand dryer have a safety cut out?*
A.	Yes the hand dryer does have a safety thermal cut-out.

back to top
Cyclone (CYC22F / CYCA22F)
Q.	*Is the hand dryer vandal resistant?*
A.	All hand dryers in the Cyclone range are made from die-cast aluminium, making them vandal resistant and suitable for medium to high risk applications including restaurants, schools, etc.

back to top
Cyclone (CYC22F / CYCA22F)
Q.	*How powerful is the hand dryer?*
A.	The 2.2kW output model has a 200W element and a 200W brush motor.

back to top
Cyclone (CYC22F / CYCA22F)
Q.	*What is the airflow rate?*
A.	The airflow of the 2.2kW unit is 362m3/hour.

back to top
Cyclone (CYC22F / CYCA22F)
Q.	*Is the hand dryer noisy?*
A.	The sound level for the 2.2kW unit is 70±5 db.

back to top
Cyclone (CYC22F / CYCA22F)
Q.	*Is the hand dryer waterproof?*
A.	The unit is moisture proof and rated to IPX1.

back to top
Cyclone (CYC22F / CYCA22F)
Q.	*Is the sensitive distance of the sensor adjustable?*
A.	Yes, the range is 10 to 30cm.

back to top
Cyclone (CYCA18CSF )
Q.	*Does the hand dryer have a safety cut out?*
A.	Yes the hand dryer does have a safety thermal cut-out.

back to top
Cyclone (CYCA18CSF )
Q.	*Is the hand dryer vandal resistant?*
A.	All hand dryers in the Cyclone range are made from die-cast aluminium, making them vandal resistant and suitable for medium to high risk applications including restaurants, schools, etc.

back to top
Cyclone (CYCA18CSF )
Q.	*How powerful is the hand dryer?*
A.	The Cyclone 1.8kW output model has a 1600W element and a 200W brush motor.

back to top
Cyclone (CYCA18CSF )
Q.	*What is the airflow rate?*
A.	The airflow of 1.8kW unit is 362m3/hour.

back to top
Cyclone (CYCA18CSF )
Q.	*Is the hand dryer noisy?*
A.	The sound level for both the 1.8kW unit is 70±5 db.

back to top
Cyclone (CYCA18CSF )
Q.	*Is the hand dryer waterproof?*
A.	The hand dryer is moisture proof and rated to IPX1.

back to top
Speedflow Undersink water heater (SF10L / SF15L)
Q.	*Is the water at mains pressure or not?*
A.	Mains preesure

back to top
Cyclone (CYCA18CSF )
Q.	*Is the sensitive distance of the sensor adjustable?*
A.	Yes, the range is 10 to 30cm.

back to top
Cyclone (CYCA22CSF)
Q.	*Does the hand dryer have a safety cut out?*
A.	Yes the hand dryer does have a safety thermal cut-out.

back to top
Cyclone (CYCA22CSF)
Q.	*Is the hand dryer vandal resistant?*
A.	All hand dryers in the Cyclone range are made from die-cast aluminium, making them vandal resistant and suitable for medium to high risk applications including restaurants, schools, etc.

back to top
Cyclone (CYCA22CSF)
Q.	*How powerful is the hand dryer?*
A.	The 2.2kW output model has a 200W element and a 200W brush motor.

back to top
Cyclone (CYCA22CSF)
Q.	*What is the airflow rate?*
A.	The airflow of the 2.2kW unit is 362m3/hour.

back to top
Cyclone (CYCA22CSF)
Q.	*Is the hand dryer noisy?*
A.	The sound level for the 2.2kW unit is 70±5 db.

back to top
Cyclone (CYCA22CSF)
Q.	*Is the hand dryer waterproof?*
A.	The unit is moisture proof and rated to IPX1.

back to top
Cyclone (CYCA22CSF)
Q.	*Is the sensitive distance of the sensor adjustable?*
A.	Yes, the range is 10 to 30cm.

back to top
Tornado Manual (CYC26F)
Q.	*Can the timer on the hand dryer be adjusted?*
A.	The timer on the manual hand dryer can be adjusted between 25 and 50 seconds.

back to top
Tornado Manual (CYC26F)
Q.	*Does the hand dryer have a safety cut out?*
A.	Yes, there is a safety cut-out on both the motor and the heating element.

back to top
Tornado Manual (CYC26F)
Q.	*Is the hand dryer vandal resistant?*
A.	All hand dryers in the Tornado range are made from enamelled steel making them vandal resistant and suitable for very high-risk situations including pubs, night-clubs, shopping centres, motorway service stations, etc.

back to top
Tornado Manual (CYC26F)
Q.	*How powerful is the hand dryer?*
A.	The hand dryer has 2.6kW output (2.4kW element with a 200W brush motor).

back to top
Tornado Manual (CYC26F)
Q.	*What is the airflow rate?*
A.	The airflow of all hand dryers in this range is 345m3/hr.

back to top
Tornado Manual (CYC26F)
Q.	*Is the hand dryer noisy?*
A.	The sound level of the unit is approximatley 70 db

back to top
Tornado Manual (CYC26F)
Q.	*Is the hand dryer waterproof?*
A.	The unit is drip proof and rated to IPX1.

back to top
Tornado Automatic (CYCA26F)
Q.	*Does the hand dryer have a safety cut out?*
A.	Yes, there is a safety cut-out on both the motor and the heating element.

back to top
Tornado Automatic (CYCA26F)
Q.	*Is the hand dryer vandal resistant?*
A.	All hand dryers in the Tornado range are made from enamelled steel making them vandal resistant and suitable for very high-risk situations including pubs, night-clubs, shopping centres, motorway service stations, etc.

back to top
Tornado Automatic (CYCA26F)
Q.	*How powerful is the hand dryer?*
A.	The hand dryer has 2.6kW output (2.4kW element with a 200W brush motor).

back to top
Tornado Automatic (CYCA26F)
Q.	*What is the airflow rate?*
A.	The airflow of all hand dryers in this range is 345m3/hr.

back to top
Tornado Automatic (CYCA26F)
Q.	*Is the hand dryer noisy?*
A.	The sound level of the unit is 70db.

back to top
Tornado Automatic (CYCA26F)
Q.	*Is the hand dryer waterproof?*
A.	The unit is drip proof and rated to IPX1.

back to top
Tornado Automatic (CYCA26F)
Q.	*Is the sensitive distance of the sensor adjustable?*
A.	Yes. There are two settings: 15-20cm or 10-15cm.

back to top
Tornado Automatic Stainless Steel (CYCA26CSF)
Q.	*Does the hand dryer have a safety cut out?*
A.	Yes, there is a safety cut-out on both the motor and the heating element.

back to top
Tornado Automatic Stainless Steel (CYCA26CSF)
Q.	*Is the hand dryer vandal resistant?*
A.	All hand dryers in the Tornado range are made from enamelled steel making them vandal resistant and suitable for very high-risk situations including pubs, night-clubs, shopping centres, motorway service stations, etc.

back to top
Tornado Automatic Stainless Steel (CYCA26CSF)
Q.	*How powerful is the hand dryer?*
A.	The hand dryer has 2.6kW output (2.4kW element with a 200W brush motor).

back to top
Tornado Automatic Stainless Steel (CYCA26CSF)
Q.	*What is the airflow rate?*
A.	The airflow of all hand dryers in this range is 345m3/hr.

back to top
Tornado Automatic Stainless Steel (CYCA26CSF)
Q.	*Is the hand dryer noisy?*
A.	The sound level of the unit is 70db.

back to top
Tornado Automatic Stainless Steel (CYCA26CSF)
Q.	*Is the hand dryer waterproof?*
A.	The unit is drip proof and rated to IPX1.

back to top
Tornado Automatic Stainless Steel (CYCA26CSF)
Q.	*Is the sensitive distance of the sensor adjustable?*
A.	Yes. There are two settings: 15-20cm or 10-15cm.

back to top
Holster Style Hair Dryer (HD190I)
Q.	*Is the hair dryer suitable for use in a bathroom?*
A.	The holster-style hair dryer is not splash proof and not suitable for bathroom use. However, the wall mounted hair dryer is suitable.

back to top
Holster Style Hair Dryer (HD190I)
Q.	*Will the hair dryer switch off automatically?*
A.	Yes, the on/off switches are spring loaded so once the hair dryer has been put down it will be switched off, even if it has not been returned to the holster.

back to top
Scirocco Convector Heater (SC2000NTFZ)
Q.	*Can the convector heater be wall mounted?*
A.	Yes, the Scirocco convector heater can either be wall mounted or free standing with the supplied “feet”.

back to top
Scirocco Convector Heater (SC2000NTFZ)
Q.	*What are the heat settings on the convector heater?*
A.	The Scirocco convector heater can be set to either 750W, 1250W and 2000W.

back to top
Scirocco Convector Heater Turbo & Timer (SC2000T)
Q.	*Can the convector heater be wall mounted?*
A.	Yes, the Scirocco convector heater can either be wall mounted or free standing with the supplied “feet”.

back to top
Scirocco Convector Heater Turbo & Timer (SC2000T)
Q.	*Does the convector heater have a turbo fan assist?*
A.	Yes, although we can now offer the option of a Scirocco convector heater without this turbo fan.

back to top
Scirocco Convector Heater Turbo & Timer (SC2000T)
Q.	*What are the heat settings on the convector heater?*
A.	The Scirocco convector heater can be set to either 750W, 1250W and 2000W.

back to top
Scirocco Convector Heater Turbo & Timer (SC2000T)
Q.	*Does the unit have a timer?*
A.	Yes, the SC2000T now has a turbo fan and a timer.

back to top
Mojave Frost Protector (FW100)
Q.	*How powerful is the convector heater?*
A.	The Mojave is a 500W unit, which will provide heating in very small rooms and offices or provide frost protection in larger rooms.

back to top
Mojave Frost Protector (FW100)
Q.	*Does the convector heater have any safety features?*
A.	Yes, the Mojave convector heater has a double overheating protection (thermal cut-out and PTC self hold).

back to top
Mojave Frost Protector (FW100)
Q.	*Can the convector heater be wall mounted?*
A.	The convector heater is designed to be wall mounted, and cannot be free standing.

back to top
Mistral Bathroom Fan Heater (VH203)
Q.	*Is the fan heater fully suitable for bathroom use?*
A.	Yes, the Mistral fan heater offers a high degree of splash resistance and is designed to cope with the humidity and condensation found in a normal bathroom application.

back to top
Mistral Bathroom Fan Heater (VH203)
Q.	*What is the case on the fan heater made from?*
A.	The case on the Mistral bathroom fan heater is metal.

back to top
Firefly Proffessional Stainless steel range (FF1500S / FF3000S)
Q.	*How are the flykillers installed?*
A.	The 1500 and 3000 models are both wall mounted.

back to top
Firefly Proffessional Stainless steel range (FF1500S / FF3000S)
Q.	*What are the flykillers made from?*
A.	The cases on all flykillers in the SS range are made from corrosion free stainless steel making them suitable for all professional applications.

back to top
Firefly Proffessional Stainless steel range (FF1500S / FF3000S)
Q.	*What size areas do the flykillers cover?*
A.	The FF1500SS covers a room area of 50m2 and the FF3000SS an area of 80m2.

back to top
Firefly Proffessional Stainless steel range (FF1500S / FF3000S)
Q.	*How do the flykillers work?*
A.	Electric flykillers work by using the UV light to attract the flies and the high voltage electric grid kills them. There is a removable tray at the base of the unit to catch the flies.

back to top
Firefly Proffessional Stainless steel range (FF1500S / FF3000S)
Q.	*Where should the flykillers be placed?*
A.	Position the flykiller away from other light sources, including sunlight, because it is the light with attracts the flies to the flykiller. The unit should be visible from all parts of the room to attract as many flies as possible. Mount the unit away from any sensitive areas, for example food preparation areas, so the flykiller is not attracting flies into these areas. Keep the machine away from any draughts.

back to top
Automatic Aerosol Dispenser with LCD (WF-0322)
Q.	*What size batteries does the aerosol dispenser take?*
A.	1 x D-cell battery. Hyco recommends heavy duty alkaline batteries for this aerosol dispenser.

back to top
Automatic Aerosol Dispenser with LCD (WF-0322)
Q.	*How long will the refill canisters last in the aerosol dispenser?*
A.	A 250ml canister, on an average setting of every 15minutes, will last just over one month on the 24hour setting.

back to top
Automatic Aerosol Dispenser with LCD (WF-0322)
Q.	*How is the aerosol dispenser operated?*
A.	The clock on the aerosol dispenser needs to be set, and then the unit can be set to come on and switch off at any time you choose. The dosage can also be set in one minute intervals from 1 to 99, although an average setting is approximately every 15 minutes. A counter can also be set on this unit. By entering the number of sprays in a canister (3000), the unit will count down and will display the word "service" when the canister is due to be changed.

back to top
Xanadu Aerosol Starter Kit (XNKIT)
Q.	*What size batteries does the aerosol dispenser take?*
A.	1 x D-cell battery. Hyco recommends heavy duty alkaline batteries for this aerosol dispenser.

back to top
Xanadu Aerosol Starter Kit (XNKIT)
Q.	*How long will the refill canisters last in the aerosol dispensers?*
A.	A 250ml canister, on an average setting of every 15minutes, will last just over one month on the 24hour setting.

back to top
Xanadu Aerosol Starter Kit (XNKIT)
Q.	*How is the aerosol dispenser operated?*
A.	The clock on the aerosol dispenser needs to be set, and then the unit can be set to come on and switch off at any time you choose. The dosage can also be set in one minute intervals from 1 to 99, although an average setting is approximately every 15 minutes. A counter can also be set on this unit. By entering the number of sprays in a canister (3000), the unit will count down and will display the word "service" when the canister is due to be changed.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*What does the solenoid valve on the boiling water unit do?*
A.	It’s a water valve that opens to let water into the unit when an electrical voltage is applied to it.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*What does the level probe on the boiling water unit do?*
A.	The level probe determines if the water in the tank is at the maximum level. It works by measuring the conductance of electricity between the water and the tank. The probe is short to check that the unit is full.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*What is the tank made of?*
A.	0.75mm thick copper.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*What happens when the boiling water unit is first switched on?*
A.	The solenoid valve opens to let water into the tank. The element stays off. When the level probe detects that the tank is full, the element is switched on until the water reaches boiling point.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*Should steam be coming out of the overflow pipe?*
A.	Some steam is normal, and the outlet pipe will get hot. If steam is excessive then the temperature may need to be adjusted.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*Can the user adjust the temperature?*
A.	This is not really designed for users to control as the initially setting is carefully calibrated and should be OK. However on the PC board there is a small hole (labelled "SET TEMPERATURE") which gives access to an adjustable resistor. Under the hole is a plastic disk with a screwdriver slot. If you imagine the dial to be like a clock face then every 1 hour that the slot is turned changes the temperature by 1 degree. Turn clockwise to increase the temperature. If you are experiencing temperature problems, please contact our Technical Department who will be able to advise you.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*Is there a thermal cut out?*
A.	There is a re-settable thermal cut-out on the element.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*What determines how many drinks can be made in one go?*
A.	The storage capacity of the unit determines the initial draw-off capacity of the unit. Please see the technical information on the Microboil page for full details.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*What determines how quickly the boiling water unit will heat up again?*
A.	The kW rating of the element, which on the Microboil is 2.4kW. Full recovery rates can be found in the technical information section on the Microboil page.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*If a user has continuous demand for boiling water that a 3L unit cannot keep up with, should they get a larger unit?*
A.	In this situation you would need more kW, i.e. another unit. Occasional heavy use would need a larger unit.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*How can scale be removed?*
A.	Remove the front cover. Undo the screw on the top of the unit and the cover plate should lift out, giving access to the tank. Add descaling powder through the hole as per manufacturer’s instructions. Please note - to drain the unit completely, use the nut at the base of the tap assembly. The tap is situated above the element and so using this to drain will leave some water in the unit.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*What is the temperature setting?*
A.	96.5 degrees Celcius.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*What are the common spare parts for this water heater?*
A.	The common spare parts available for the Microboil are: solenoid PC board tap assembly element thermistor

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*Is the water heater vented or unvented?*
A.	Vented.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*What happens if there is a pressure build up inside the water heater?*
A.	Pressure cannot build up inside the water heater because steam/water backs up into cold header tank, which is open to the atmosphere.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*Can you use regular taps with this water heater?*
A.	Yes.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*How many sinks can the water heater serve?*
A.	About 1 sink for every 7-8 litres roughly.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*What are the capacities in litres?*
A.	25, 50, 75 and 100L

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*Where would the water heater normally be mounted?*
A.	The Apollo water heater needs to be wall mounted, as high as possible to give good water pressure. Fitting must be vertical.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*Can you fit the water heater on the floor?*
A.	Not really - the wall brackets are not suitable and the plumbing and electrical connections are underneath the water heater. Also, the water pressure depends on the height drop from the top of the cold feeder tank to the taps, so this is only an option if the sinks are at a lower level.

back to top
Microboil Premier & Standard (MBS & MBP)
Q.	*How do you empty the water for service?*
A.	There is a drain tap with a hosepipe connection at the bottom of the water heater.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*Does it matter how high up the water heater is mounted?*
A.	Yes because water pressure depends on height drop. You need a minimum of a metre between the top of the water heater and the tap. The higher the water heater is mounted the better.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*What is the tank made from?The case?*
A.	The tank is copper and the case is made from steel.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*How do you adjust the temperature?*
A.	You have to remove the metal cover under the water heater first, but it is just a standard rod thermostat like a domestic immersion heater.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*Can you tell if the element is on?*
A.	No.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*How big is the cold feeder tank?*
A.	8L for the 25L and 25L for the 50,75 and 100L units.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*How big is the cold water mains connection? The hot outlet?*
A.	15mm and 22mm respectively.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*Where are the plumbing connections on the water heater?*
A.	The cold inlet and the overflow can be fitted either on the left or the right. The outlet and the electrical connections are underneath the water heater and can’t be varied.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*Where is the element?*
A.	The element is underneath the water heater. Connections are shielded by a metal plate.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*Is the element standard, or special that would have to be bought from Hyco?*
A.	The water heater uses a standard 2 ¼” immersion heater element.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*How long would it take to heat up a unit from cold (approx.)?*
A.	The general rule on these water heaters is 1minute per litre so the 25litre unit would take approximately 25 minutes.

back to top
Apollo Vented Cistern Combination Unit (AP25LS, AP50LS, AP75LS, AP100LS)
Q.	*What is the temperature range?*
A.	25-65 degrees Celsius.

back to top
Speedflow Undersink water heater (SF10L / SF15L)
Q.	*Is the water heater vented or unvented?*
A.	Unvented

back to top
Speedflow Undersink water heater (SF10L / SF15L)
Q.	*What is supplied with every water heater?*
A.	A pressure relief valve is supplied a s standard. This valve opens if the water pressure is above 6 bar. This is a safety device for if the pressure gets too high and must be fitted in all cases.

back to top
Speedflow Undersink water heater (SF10L / SF15L)
Q.	*Can the temperature of the water heater be adjusted?*
A.	Yes - from minimum to maximium (75 degrees Centigrade) on the outside of the water heater via a control knob.

back to top
Speedflow Undersink water heater (SF10L / SF15L)
Q.	*Is there a safety cut-out on the water heater and can it be re-set by the user?*
A.	The safety cut-out is manually re-settable. To access the cut-out, unscrew the grey plastic cover plate. The cut-out is idebtified by a small red button ans is located in the centre of a black disc approximately 1 1/2" in diameter. To re-set the cut-out, press the red button.

back to top
Speedflow Undersink water heater (SF10L / SF15L)
Q.	*Can the Speedflow be located above the sink?*
A.	The water heater can be installed more or less anywhere convenient, but it MUST be the right way up, with pipes still coming out of the top of the unit. Height is not relevant, because the heater works at mains pressure rather than gravity.

back to top
Speedflow Undersink water heater (SF10L / SF15L)
Q.	*What is the tank made out of?*
A.	Glass lined steel.

back to top
Speedflow Undersink water heater (SF10L / SF15L)
Q.	*When do you need the SF1 or SF2 Kits?*
A.	Please refer to the installation instructions and technical data that can be found on the Speedflow product page in the water heating section of the web site.

back to top
Speedflow Undersink water heater (SF10L / SF15L)
Q.	*Is there any maintenance to carry out on this water heater?*
A.	Yes, the anode must be checked annually for signs of erosion and replaced when necessary. Please note that the anode is now part of the heating element and so if the anode does require replacing then you should purchase an SFELEMENT. Please contact us if you require any further assistance.

back to top
Speedflow Undersink water heater (SF10L / SF15L)
Q.	*What are the common spare parts for this water heater?*
A.	Common spare parts for the Speedflow are: thermostat, thermal cut-out, element (includes anode). Information about spare parts can be found by accessing the Speedflow product page and using the link to related product spares.

back to top